Blower Replacement Parts
Commander Blower Replacement Parts
We maintain a complete selection of Blower Replacement Parts for your Cyclone Rake Commander. For easy ordering click on the yellow key number bubble in the drawing below. A small window will open where you can change the quantity of the part you’re ordering and add it right to your cart from there. Or you can scroll farther down the page and order from the more detailed list of parts.
Our impellers are specifically designed to only be used with our Cyclone Rakes. They are designed for an engine with a 1" diameter, keyed shaft with a 3" reveal. Do not order a larger impeller than what is offered for your specific Cyclone Rake as it will not fit and function properly.
If you are unsure of the part you need, or don’t see it listed here, give our Product Technicians a call and we’ll get you back up and running.
| Key # | Part # | Product Name | QTY | Price | |
|---|---|---|---|---|---|
| 289 | 01-01-145 | Liner Nut (Special Part- Hardened Steel) |
$0.50
| ||
| 298 | 01-03-1866 | Blower Housing Handle with hardware |
$18.90
| ||
| 454 | 02-03-018 | 4-Blade-Yellow Impeller Replacement Kit - XR950 and 6.5HP Vanguard Cyclonic |
$169.00
| ||
| 489 | 01-03-045 | Latch, with Screws & T-nuts (set of 2) |
$19.90
| ||
| 523 | 01-02-564 | Standard Strike, with Hardware (Set of 4) |
$15.00
| ||
| 568 | 01-02-126 | 4 Caster Wheels with Nuts and Washers - Motor Frame |
$27.50
| ||
| 571 | 01-02-128 | Exit Plate with Studs, Wide Strike and Nuts |
$9.50
| ||
| 01-03-017 | Hardware Kit Impeller Replacement (B&S Intek & Vanguard Phase 1 & 2) |
$25.00
| |||
| 02-02-018 | Hardware Kit for Impeller Replacement (XR950 & 6.5HP Cyclonic Engines) |
$25.00
|