Commander B&S Intek, Vanguard Phase 1, and Phase 2 Replacement Engines & Parts

The Briggs & Stratton® Pull-Cord engine for your Cyclone Rake is built to outlast and outperform consumer-grade engines many times over. We maintain a full selection of genuine Briggs & Stratton engine parts.

Please Note: If you need to replace your Tecumseh®, Briggs & Stratton® Intek™ or 6.5 Vanguard engine, the direct replacement engine is either the Briggs & Stratton XR950PRO Upgrade Kit (302p) or the 6.5 HP Vanguard Cyclonic Upgrade Kit (302r)


For easy ordering click on the yellow key number bubble in the drawing below. A small window will open where you can change the quantity of the part you’re ordering and add it right to your cart from there. Or you can scroll farther down the page and order from the more detailed list of parts.

Our engines are specifically designed to only be used with our Cyclone Rakes. They are designed with a 1" diameter, keyed shaft with a 3" reveal. Do not order an engine for a larger Cyclone Rake than what you own as it will not fit and function properly. 

If you are unsure of the part you need, don’t see it listed here, or you are unsure of the model of your Briggs & Stratton engine, give our Product Technicians a call and we’ll get you back up and running.

Intek & Vanguard Phase 1 & 2 Pull-Cord Engines
{[Name]}
Read More





{[ProductKey]}
 
 
Key # Part # Product Name QTY Price  
252 01-01-812 Oil Drain Plug, for all Briggs & Stratton engines

$3.50

254 01-01-301 Shaft Key (Not shown)

$2.00

294 01-01-298 Exhaust Deflector Screw, #8-3/8 sheet metal screw

$0.50

300 01-01-753 Square Pleated Paper Air Filter fits all Intek and Vangard models that use square filters

$10.00

302p 01-04-306 Engine Upgrade Kit - 6.5 HP Cyclonic Vanguard

$600.00

302r 01-04-158 Engine Upgrade Kit - XR950PRO

$479.00

303a 01-01-752 Oil Fill Cap, for Briggs & Stratton Intek engine ONLY

$7.50

303b 01-01-1356 Oil Fill Butterfly Cap

$10.00

304 01-01-758 Spark Plug (Champion RC12YC, Bosch FR8DL4 or equivalent)

$8.00

309 01-01-756 Square Foam Air Filter fits all Intek and Vangard models that use square filters

$7.50

310b 01-01-1353 Recoil Starter, fits all Vanguard models

$57.50

311 01-01-1111 Motor Handle Bolt, M5 x 20 Grade 8 Socket

$1.00

311b 01-01-1800 Motor handle bolt, M5 x 12mm Hex Head

$0.50

315 01-01-1774 Air Filter Cover for Vanguard 5.5HP & 6.5HP Phase 2 engines

$15.00

493c 01-01-1787 Drawn Engine Bracket for Briggs 6.5HP engine (Not shown)

$15.00

500 01-01-1329 Gas Cap for 5.5HP & 6.5HP Vanguard Phase 1 engines

$15.00

501a 01-01-1331 Exhaust Deflector - for 5.5HP & 6.5HP Vanguard engines

$5.00

502 01-02-2149 Exhaust Deflector with Hardware

$15.00

511 01-02-391 Heat Shield Assembly - for 5.5 & 6.5HP Vanguard engines

$12.50

525 01-01-1744 Air Filter Outer Cover Knob, for Vanguard Phase 2 & XR950 engines

$7.50

526 01-01-1745 Air Filter Inner Wing Nut, M6 for Vanguard engines

$3.00

559 01-02-609 Aluminum Fuel Bowl Set for all Vanguard engines

$15.00

560 01-01-782 Gas Cap - Carbon Canister for Vanguard engines

$35.00

562 04-02-017 Motor Handle (Black) for 5.5HP & 6.5HP Phase 2 engines

$17.50

570 01-03-2109 Engine Handle with hardware

$17.50

574 01-01-1909 Air Filter and Pre-filter for Vanguard 5.5 HP & 6.5HP Phase 2 engines

$25.00