BagID-Square

Rectangular Collector Bags

These bags have the same width, front and rear, as shown in the aerial view. Measure the width of the bag carefully with a tape measure, to be sure you order the correct bag.

  • 34” front measurement: Order item 153b.  Or you can upgrade to the EZ-Flow Unloading Collector with our Commander Tapered Collector Upgrade Kit. Order item 106.

  • 39” front measurement: You must upgrade to the EZ-Flow Unloading with our Commercial PRO Tapered Collector Upgrade Kit. Order item 107.

Note: If your Classic Collector bag has an elastic collar with straps and snaps shown on the right, you must order a Latch Upgrade Kit. Order item 148

 

 

 

BagID-EZ-flow“Easy-Flow” Tapered-Shape Collector Bags

These bags have a tapered shape and the rear of bag is supported on two triangular extender brackets. The back of the bag is wider than the front as shown in the aerial view below. Measure the front width of the bag carefully with a tape measure, to be sure you order the correct bag.