The Blower Unit is the heart of the Cyclone Rake. It is very important to inspect it prior to each use and to clean it out after use. We maintain a complete selection of Blower Unit replacement parts for all models of the Cyclone Rake. Please make sure to use only genuine Cyclone Rake parts on your Cyclone Rake lawn and leaf vacuum.
\r\n\r\nThe Blower Replacement Kit includes everything you need to rebuild the heart of your Cyclone Rake: impeller, blower housing with steel liner, frame and wheels. Includes complete instructions as well as some special tools you’ll need. You also have the option of upgrading to the Blue Diamond Liner for improved strength and wear resistance in high abrasion applications such as collecting abrasive debris, if you have sandy soil, bare areas, or for commercial use.
\r\n\r\nFor easy ordering click on the yellow key number bubble in the drawing below. A small window will open where you can change the quantity of the part you’re ordering and add it right to your cart from there. Or you can scroll farther down the page and order from the more detailed list of parts.
\r\n\r\n\r\n\r\n Not sure which engine you have? Find your engine model number on the label on the side of your engine block, just below the recoil starter.\r\n
\r\n\r\n\r\n If you have a Vanguard 6.5HP, use this guide to tell which version you have:\r\n
\r\n\r\n| \r\n | Phase I (2007–2010) | \r\n Phase II (2010–2019) | \r\n Cyclonic (2019–present) | \r\n
|---|---|---|---|
| Label starts with | \r\n12H | \r\n13L | \r\n12V | \r\n
| Blower housing | \r\nLeft column | \r\nLeft column | \r\nRight column | \r\n
\r\n Still not sure? Give us a call — we’ll look it up by serial number.