Spring Mowing Made Easy

 
Spring grass mowing season is here, and it is a good time to remember some best practices for mowing your lawn and keeping it looking great.
            Proper mowing height is extremely important. The general rule of thumb is to only remove about one-third of the grass height. Mowing at a taller height, more frequently, helps grass plants stay healthy for the long-term and grow healthy root systems ready for supporting plants during period of stress.    The recommended grass height after spring mowing is usually two inches to three inches, but may be more or less, depending on the type of grass. Consult your local garden center or a university extension guide to make sure you are mowing at the proper height.
            Grass clippings are best left to decompose in the yard, providing natural nutrients and organic matter for a healthy lawn. But collecting some grass clippings in the spring can prevent excessive mulch buildup. A grass collection system, like the Cyclone Rake, can help you collect lawn trimmings to compost, especially during spring periods of heavy grass growth.

 

            The type of mower that you use is largely a matter of personal preference and budget. Lawn tractors and other self-propelled mowers are a good fit for larger lawns. Walk-behind, or “push”mowers, are a great fit for smaller lawns and provide the operator with some additional exercise.
            Walk-behind mowers can also be a useful tool on damp spots in larger lawns in the spring. While mowing when grass is wet is never recommended – this can promote the spread of disease – spring rains can make the ground spongy and more likely to be compacted from a heavier lawn tractor. Low-lying or poorly drained spots can be mowed with a walk-behind mower to reduce compaction. Remember to keep the lawnmower blades sharp, no matter what kind of mower you use; a good sharpening every month or so is usually recommended.

 

            Keeping the grass at a longer, healthy height can also help you put lines or “stripes” in your yard. A simple way to make back-and-forth stripes is simply to mow in straight lines, mowing each pass in the opposite direction of the last one. A lawn roller or striping kit for your lawnmower can also help create this look. A checkerboard appearance can be created by rolling in the opposite direction which you’ve mown. Try creating your own “checkerboard” by simply alternating the direction you mow with each cutting. While not as dramatic an effect as that done with a roller or kits, you’ll get a nice appearance and keep the grass healthier by not mowing in the same direction all the time.

Leave a Comment

Your email address will not be published. Required fields are marked *